OrcaSlicer-bambulab/resources/profiles/Blocks/filament/Blocks Generic PA-CF.json

{
    "type": "filament",
    "name": "Blocks Generic PA-CF",
    "inherits": "fdm_filament_pa",
    "from": "system",
    "setting_id": "BSSI007",
    "filament_id": "BSFI007",
    "instantiation": "true",
    "filament_type": [
        "PA-CF"
    ],
    "filament_flow_ratio": [
        "0.95"
    ],
    "filament_max_volumetric_speed": [
        "10"
    ],
    "nozzle_temperature_range_low": [
        "240"
    ],
    "nozzle_temperature_range_high": [
        "290"
    ],
    "nozzle_temperature_initial_layer": [
        "255"
    ],
    "filament_density": [
        "1.25"
    ],
    "nozzle_temperature": [
        "250"
    ],
    "hot_plate_temp_initial_layer": [
        "90"
    ],
    "hot_plate_temp": [
        "90"
    ],
    "filament_retraction_length": [
        "1.2"
    ],
    "filament_z_hop": [
        "0.0"
    ],
    "fan_min_speed": [
        "0"
    ],
    "fan_max_speed": [
        "60"
    ],
    "fan_cooling_layer_time": [
        "4"
    ],
    "close_fan_the_first_x_layers": [
        "3"
    ],
    "slow_down_layer_time": [
        "2"
    ],
    "slow_down_for_layer_cooling": [
        "1"
    ],
    "reduce_fan_stop_start_freq": [
        "0"
    ],
    "slow_down_min_speed": [
        "10"
    ],
    "enable_overhang_bridge_fan": [
        "1"
    ],
    "overhang_fan_threshold": [
        "95%"
    ],
    "overhang_fan_speed": [
        "80%"
    ],
    "additional_cooling_fan_speed": [
        "0"
    ],
    "activate_air_filtration": [
        "1"
    ],
    "complete_print_exhaust_fan_speed": [
        "100"
    ],
    "during_print_exhaust_fan_speed": [
        "80"
    ],
    "compatible_printers": [
        "BLOCKS RD50 V2 0.4 nozzle",
        "BLOCKS RD50 V2 0.6 nozzle",
        "BLOCKS RD50 V2 0.8 nozzle",
        "BLOCKS RD50 V2",
        "BLOCKS RF50 0.4 nozzle",
        "BLOCKS RF50 0.6 nozzle",
        "BLOCKS RF50 0.8 nozzle",
        "BLOCKS RF50"
    ]
}